Throwing Knife Tutorial

In this video you will see Peter make a throwing knife using an induction heater, a power hammer and a hammer and anvil, he explains step by step what he's doing and why. While Peter's using the induction heater and power hammer to make this process go faster, you can of course use the hammer and anvil and forge.

 

The video has some strange autofocusing going on, especially when I zoom into the metal while it's being heated, sorry about that. The video comes in two parts, and does end up cutting off due to running out of space on the second part, but the knife was finished at that point. If you have any questions, or you would like to take a one-on-one class, please give us a call at (203) 597-1114, send us an email, or fill out the contact form.